Showing 1513–1536 of 1755 resultsSorted by popularity
-
not rated $2,867.00REPLACEMENT EIGHTEEN SOUND 8R-KIT10MB600
Replacement for Eighteen Sound's 10MB600 speaker.
-
not rated $3,087.00REPLACEMENT EIGHTEEN SOUND 8R-KIT10M600
Replacement for Eighteen Sound's 10M600 speaker.
-
not rated $2,867.00EIGHTEEN SOUND DIAPHRAGM R-H610
Eighteen Sound diaphragm, for ND2080, ND1460T, HD2080T and HD1480T drivers.
-
not rated $3,087.00EIGHTEEN SOUND DIAPHRAGM R-A8M600
Eighteen Sound diaphragm, for models ND2060A, ND1460A and ND 1480A
-
not rated $6,098.00DRIVER EIGHTEEN 2 MOD. HD3020T
2” PEN titanium driver, program power: 220W, 75mm voice coil, sensitivity: 110dB, minimum crossover frequency: 1000Hz, flux density: 1.9T, weight: 4.9kg.
-
not rated $3,000.00EIGHTEEN SOUND DIAPHRAGM D-KIT HD3020T
Replacement for Eighteen Sound's HD3020T driver.
-
not rated $7,981.00HORN EIGHTEEN SOUND 18 18LW2420/8
18” driver, ferrite magnet, designed for high SPL subwoofer applications in a reflex, bandpass, or horn loaded configuration, fiberglass reinforced straight fluted cone, large displacement suspension system, inner copper voice coil -4” inch exterior, impedance: 8 ohms, rated power: 1300 watts, continuous power: 2600 watts, sensitivity: 97 dB, frequency range: 30 – 2500 Hz, weight: 12.4 kg.
-
not rated $7,981.00EIGHTEEN SOUND 18 HORN 18LW2400/8
18” driver, ferrite magnet, designed for high SPL subwoofer applications in a reflex, bandpass, or horn loaded configuration, fiberglass reinforced straight fluted cone, large displacement suspension system, inner copper voice coil -4” inch exterior, impedance: 8 ohms, rated power: 1300 watts, continuous power: 2600 watts, sensitivity: 97 dB, frequency range: 30 – 2500 Hz, weight: 12.4 kg.
-
not rated $6,072.00ASHLY CARD MOD. NE24.24M OUTPUT
Ashley card. Model: NE24.24M OUTPUT. 4 analog audio outputs for 24.24M audio matrix.
-
not rated $2,715.00ART MOD PREAMPLIFIER USB-DUAL-PRE
2-channel preamp with USB connection, 2 XLR/jack combo inputs, 48V phantom power, TRS stereo monitor output, headphone output, USB bus-powered (also supports battery or AC adapter operation), zero-latency monitoring, frequency response: 20 Hz – 20 kHz, dimensions: 44.5 x 117 x 119 mm, weight: 0.59 kg.
-
not rated $3,292.00ART MOD PREAMPLIFIER TUBE-MP
Tube microphone preamplifier with professional audio interface, extremely quiet and unobtrusively constructed input stage, pure and musical amplification up to 70 dB, additional output amplification, XLR inputs and outputs and 1/4" plug, selectable input impedance, LED indicators precise, dimensions: 150 x 44 x 165 mm, weight: 1.1 kg.
-
not rated $3,585.00PATCHING BAY ART 48 POINTS BAL.
48-point balanced patch bay, cable management solution, optimizes connectivity, 19" inch (1U) steel chassis, balanced 1/4" TRS connectors, CMMR better than -90 dB (-95 dB typical), channel-to-channel isolation better than -80 dB (-95 dB typical), dimensions: 44 x 483 x 89 mm, weight: 2 kg.
-
not rated $6,471.00MIXER ART MOD. MX225
5-Zone Layout Mixer, Input Connectors: 4 XLR-F Balanced, Output Connectors: 10 XLR-M Balanced, Input Impedance: 47K Ohms, Output Impedance: 200 Ohms, Max Input Level: +20 balanced dBu., maximum output level: +24 dBu balanced.
-
not rated $8,271.00ART P/AUDIF AMPLIFIER HEADAMP6PRO
6-channel headphone amplifier with separate Bass and Treble controls, front and rear panel output jacks, balanced XLR and 1/4" TRS inputs, operates in 4 modes: Stereo, Mono (Source Left), Mono (Source Right) o Summed Mono (Source Left & Right), independent front-mounted auxiliary input source, 8-segment level meters on all channels and bus, dimensions: 44.5 x 482 x 190 mm, weight: 3.1 kg.
-
not rated $6,612.00ART P/AUDIF AMPLIFIER HEADAMP6
Headphone amplifier, 6 channels with separate bass and treble controls, front and rear panel output jacks, balanced XLR and 1/4 inputs, operates in stereo, mono (left source), mono (right source), and mono ( left and right sources), auxiliary front mounted on separate input source, 8-segment LED level indicators on all channels and buses, maximum input level: +21.5 dBu, input impedance: 40 kilo-ohms balanced, level Max Output: 500 mW into 32 ohms, Max Gain: 25.6 dB (tone controls flat), Frequency Response: 20 Hz – 50 KHz +0, -2 dB, CMMR: 40 dB, Dimensions: 44.5 x 482 x 190mm, weight: 3.1kg.
-
not rated $12,436.00AKG-IN MICROPHONE. WMS-450 VD5
AKG wireless microphone. Model: WMS-450-VD5. Includes: One HT-450 handheld transmitter, one D5 microphone, one SR-450 receiver, one SA-63 stand adapter, one AA-size battery, two antennas, one rack mount kit, and one charger.
-
not rated $1,294.00AKG UHF RECEIVER MOD. SR40 US58
Stationary receiver for WMS 40 systems, UHF operation, 1 channel, carrier frequency range US58 / 734.600 MHz, working range: 100 meters, frequency response: 65 Hz – 20 kHz, display with RF, Mute and Clip status LEDs, Quarter antenna -wavelength, dimensions: 200 x 190 x 44 mm, weight: 630 g.
-
not rated $4,317.00AKG UHF RECEIVER MOD. SR4000 BANDIV
AKG UHF receiver. Model: SR4000BIV. True Diversity stationary receiver for all WMS 4000 transmitters. Operates in a UHF carrier frequency band from 650 MHz to 863 MHz. FM modulation. Nominal deviation: 20 kHz. Audio bandwidth: 35 to 20,000 Hz. Harmonic distortion: <0.3% with nominal deviation. Signal to Noise Ratio: 118dB Power Consumption: 400mA Measurements: 200 x190 x 44 mm. Weight: 972g.
-
not rated $3,051.00AKG TRANSMITTER BELT PT4000 BANDIV
Transmitter for connecting to dynamic and condenser microphones operating with a supply voltage of approx. 6 V. A guitar, electric bass or keyboard can also be connected. It works in a distribution bandwidth of maximum 30 MHz in the carrier frequency range from 650 MHz to 862 MHz. Band IV.
-
not rated $1,216.00AKG MICROPEN MP40 US58 TRANSMITTER
AKG Micropen transmitter. Model: MP40 US58. Miniature transmitter with a detachable C407 decondenser microphone with omnidirectional characteristic. The transmitter has been specially developed for speech transmission in combination with the receivers of the AKG WMS 40 system. The MP40 Micropen works with a UHF frequency from 710 to 865 MHz and with a dipole antenna built into the box. US58 734.600MHz
-
not rated $1,216.00AKG MICROPEN MP40 US54 TRANSMITTER
AKG Micropen transmitter. Model: MP40 US54. Miniature transmitter with a detachable C407 decondenser microphone with omnidirectional characteristic. The transmitter has been specially developed for speech transmission in combination with the receivers of the AKG WMS 40 system. The MP40 Micropen works with a UHF frequency of 710 to 865 MHz and a dipole antenna built into the box. US54 710.400MHz
-
not rated $1,216.00AKG MICROPEN MP40 KR3 TRANSMITTER
AKG Micropen transmitter. Model: MP40 KR3. Miniature transmitter with a detachable C407 decondenser microphone with omnidirectional characteristic. The transmitter has been specially developed for speech transmission in combination with the receivers of the AKG WMS 40 system. The MP40 Micropen works with a UHF frequency of 710 to 865 MHz and integrated dipole antenna in the box. KR3 745.650MHz.

























