Showing 841–864 of 1286 resultsSorted by popularity
-
not rated $943.00PEDAL NUX STRAIGHT DISTORTION
Distortion pedal for electric guitar, heavy distortion for hard rock and metal, additional amount of gain boost at the highest frequency for a more direct distortion effect, passive bass and treble equalizer, true-bypass hardware, input impedance: 1 milli-ohm, output impedance: 10 kilo-ohms, dimensions: 121 x 77 x 48 mm, weight: 230 g.
-
not rated $943.00
NUX PLEXI CRUNCH PEDAL
Guitar Crunch Pedal, Classic British High Gain Tone, Analog Circuit w/ 3 Gain Stages, FES Simulates Distortion Characteristic of a Tube & Active Tone Circuit, True Bypass, Input Impedance: 1 milli-Oh, Input Impedance: output: 10 kilo-ohms, power consumption: < 20 mA, works with a 9V battery or power adapter with a minimum of 300 mA regulated (not included), dimensions: 121 x 77 x 48 mm, weight: 230 g .
-
not rated $943.00
PEDAL NUX NOD-2 TUBEMAN MKII OVERDRIVE
Overdrive pedal for guitar, Drive, Level and Tone knobs, 1/4” input and 1/4” output, FET transistor that helps achieve the perfect overdrive sound so that transistor amps get a sound similar to a real tube amp , highlights harmonics, uses 9V DC adapter (not included), dimensions: 94 x 51 x 53 mm, weight: 174 g.
-
not rated $1,571.00
PEDAL NUX NOD-1 HORSEMAN OVERDRIVE
Overdrive pedal for guitar, Gold and Silver modes, 2 independent pedal sounds in a mini stomp box, Gain, Treble and Output controls, voltage converter, selectable True Bypass and Buffer Bypass, works with a 9V DC adapter (not included) ).
-
not rated $4,398.00
PEDAL NUX NGS-6 AMP ACADEMY
Pro-level amp modeling with bias tweaking, 7 independent moving signal blocks with send/return effects loop, intuitive operation and editing software, 1024-sample IR resolution, and slot for third-party IR loader with automatic format editor, scenes versatile application modules with independent 1/4” and XLR IR outputs, ultra-low system latency (1.2 ms) and powerful premium NXP RT DSP (1 GHz), comes with insertable Y cable for effects loop send /return, USB recording interface, AmpAcademy editor software and firmware update, 110 dB ultra-wide dynamic range, input impedance: 1 milli-ohm, output impedance: 1 kilo-ohm, sample rate: 48 kHz / 32 -bit, power: 9V DC (tip negative, optional adapter ACD-006A), current consumption: less than 300 mA, dimensions: 105 x 115 x 58 mm.
-
not rated $943.00
PEDAL NUX NDS-2 BROWNIE DISTORTION
Classic British distortion pedal for guitar, Tone knob to control the amount of high frequencies, Level knob to control the signal level, Gain knob to control the amount of gain, LED indicator to know when the pedal is active, On/Off footswitch Off for the effect, true bypass, 1/4” jack input to connect the pedal to the guitar or other effects, 1/4” output to connect to the amplifier or the input of another effects unit, works with a 9V adapter no included.
-
not rated $4,334.00
PEDAL NUX NDD-7 TAPE ECHO
Tape echo pedal, tribute to the 1974 Japanese-made Space Echo, delay time up to 1600, delay time up to 1600 ms per Tap Tempo, 7 combination Repro-Tape Heads and reverb only, Core-Image technology that provides a Tape Natural echo with a parallel soring reverb sound, realistic infinite pitch shifting feedback with TIME and REPEAT adjustment knobs, subdivision time signature with Tap Tempo footswitch, 40-second stereo phrase loop with OLED status display, optional delay time display (MS / BPM), MIDI in and out, Holding ON footswitch for auto-feedback, sample rate: 48 kHz, A/D converter: 32-bit, frequency response: 20 Hz – 20 kHz, input impedance: 5 milli -ohms, output impedance: 100 ohms, dimensions: 105 x 115 x 58 mm, weight: 440 g.
-
not rated $3,456.00
PEDAL NUX NDD-6 DUO TIME
Duotime delay pedal, ultra musical and easy to operate, analog delay, tape echo, modulation delay and verb delay, controls: LEVEL knob, DELAY knob, TIME 1 knob, TIME 2 knob, REPEAT 1 knob, REPEAT 2 knob, knob PARAMETER, OLED display, ON LED indicator, TAP LED indicator, footswitch ON, footswitch TAP, sampling rate: 48 kHz, A/D converter: 32 bits, signal processing: 32 bits, maximum input level: 10 dBu/2.8Vrms , input impedance: 5 milli-ohms, maximum output level: 10 dBu/2.8Vrms, output impedance: 1 kilo-ohm, dynamic range: 102 dBu. dimensions: 105 x 115 x 58 mm, weight: 440 g, Does not include power adapter.
-
not rated $1,101.00
PEDAL NUX NCP-2 SCULPTURE COMPRESSOR
Compressor pedal for guitar, clean mode and clip mode, led for clip mode, sustain, level and blend knobs, 1/4” jack input and output, True Bypass / Buffer Bypass, works with a 9V DC power adapter (not included) , dimensions: 94 x 51 x 53 mm, weight: 174 g.
-
not rated $2,701.00
PEDAL NUX NBK-5 MASAMUNE BOOST & COMPRES
Compressor and boost pedal with 2 clipping modes, compression level, sustain and blend, toggle switch booster with Hi-Cut, drive, internal routing, external switch output.
-
not rated $3,456.00
PEDAL NUX NAP-5 STAGEMAN FLOOR PREAMP/DI
Analog acoustic preamp pedal, chorus, reverb and freeze effects, notch knobs, gain knobs, 3-band EQ (bass, middle and treble), mid frequency switch, input optimization lever for piezo or magnetic pickups, 60 looper seconds, XLR DI output, 1/4" TRS Send/Return inputs, 1/8" auxiliary input, headphone output, USB input for firmware updates.
-
not rated $1,463.00
PEDAL NUX METAL CORE DELUXE
Distortion pedal for guitar, 2-position high-gain tone circuit and 2 tones, built-in noise gate, 4 control knobs: level, gain, bass and treble, TR jack input and output, switch voice 1, voice 2, to -lock, works with 9V power adapter (negative tip), dimensions: 122 x 72 x 47 mm, weight: 270 g.
-
not rated $1,383.00
PEDAL NUX KOMP CORE DELUXE
Multi-function compressor pedal for guitar, Blend knob to activate or deactivate the original dry signal, volume knob, attack knob and sustain knob, 3-way mini switch to choose the intensity of compression without sound coloration, clip mode, clean and normal, analog circuit, true bypass
-
not rated $1,258.00
PEDAL NUX DRIVE CORE DELUXE
Overdrive pedal for electric guitar, it can transport your signal in 3 different ways depending on your needs: clean boost, drive and mix, the tone knob gives an ultimate shape to your signal and controls the balance between high and low frequencies, true bypass, works with 9V adapter (negative tip), dimensions: 122 x 72 x 47 mm, weight: 270 g.
-
not rated $1,280.00
PEDAL NUX AD-3 ANALOG DELAY
Analog delay pedal for guitar, classic delay effect, analog bucket-brigade circuit, True-bypass hardware switching to prevent tone loss, delay time, repeat and blend knobs, 1/4" jack input and output, 300 ms of time in delay, vintage sound, metal housing, works with a 9V battery or power adapter (not included).
-
not rated $3,492.00
HOTONE PEDAL MOD. XP-20 MINI XTOMP
Mini Modeling Pedal, 120+ effects in one small pedal, free updates via app, Hotone CDCM technology for maximum dynamics and realistic feel, USB port for firmware updates, aluminum housing, buffered bypass with 100% signal path analog, 6 transparent knobs with LEDs, footswitch: Effect bypass, power consumption: 250 mA, 9V DC power supply (not included), does not use batteries, dimensions: 63 x 113 x 43 mm, weight: 200 g.
-
not rated $6,321.00
HOTONE PEDAL MOD. XP-10 XTOMP
Multi-Effects Controller Pedal, Simulates all kinds of iconic vintage sounds, vintage tracks, and modern pedals through its growing effects library of over 300 models, Ultra Slim Design, True Bypass Footswitch with Halo LED, 6 Knobs with Halo LED, Stereo I/O: L – Relay True Bypass, R – Buffered Bypass (analog), free iOS or Android app for loading effects, DC 9V power supply.
-
not rated $3,030.00
HOTONE PEDAL MOD. OMP-6 OMNI IR
IR Pedal Simulator of Guitar or Bass Cabinet, Advanced DSP Platform with High Quality 24-Bit A/D/A Conversion and Excellent Dynamic Response, Internal Voltage Boost Circuit for Large Headroom with Standard 9V DC Power Supply , 40 legendary guitar and bass IR cabinets, detailed 4-band EQ with flexible frequency range and 12dB max boost/cut, supports 3rd party IR files, USB jack for firmware upgrade, IR management/loading with free software for Mac or PC, aux in and headphone out for practicing and jamming, 40 presets, built-in high-resolution OLED display, assignable footswitch with LED, 9V DC power supply, power consumption: 200 mA, dimensions: 58 x 101 x 47mm, weight: 220g.
-
not rated $2,895.00
PEDAL HOTONE MOD. OMP-5 OMNIAC
Compact and easy-to-use acoustic simulator pedal for acoustic or electric instruments, advanced DSP platform with high-quality 24-bit A/D/A conversion and excellent dynamic response, internal voltage boost circuit for high headroom with power supply Standard 9V DC power, 15 high-quality acoustic simulations including steel strings, nylon strings, acoustic basses, double basses and more, detailed 4-band EQ with flexible frequency range and 12dB maximum boost/cut, USB connector for update firmware and manage presets with free software for PC or Mac, aux input and headphone output for practicing and jamming, 15 presets, built-in high-resolution OLED display, assignable footswitch with LED, 9V DC power supply, power draw : 200 mA, dimensions: 58 x 101 x 47 mm, weight: 224 g.
-
not rated $2,584.00
HOTONE PEDAL MOD. AD-20 A STATION
Compact size acoustic preamp pedal, durable aluminum housing, powerful 3-band EQ with pre/post selection to boost and shape your bass tones, DRIVE channel with a wide tonal range from mild to massive distortion, thoughtfully integrated optical compressor designed, BLEND knob to combine the driven signal and the direct signal, DI output to feed the signal directly to the mixer or for recording, effects loop for extended bass effects, different outputs (XLR output, ¼" output, parallel output of ¼”) to work with bass amps, audio interfaces, mixers and other equipment, phone jack for quiet practice, Ground-Lift function to eliminate ground noise, works with a 9V power adapter or battery 9V, dimensions: 140 x 120 × 54mm, weight: 470g.
-
not rated $10,747.00
FISHMAN PLATINUM PRO PRO-PLT-201 PEDAL
Discrete, high-headroom 17V Class A analog preamp for acoustic instruments, 5-band tone control with sweep-mid and crossover frequency, EQ mode that tailors the EQ for bass or other instruments, phase control, and precision notch filter reduces feedback, adjustable one-knob compressor smooths playing dynamics, onboard fully chromatic digital tuner, volume boost footswitch with level control (+12 dB), balanced XLR DI with pre/post EQ adjustment and ground lift, powered by 9V battery (not included) or Fishman 910R power adapter (optional), battery life: 30 hours, dimensions: 158 x 143 x 54 mm, weight: 0.64 kg.
-
not rated $9,688.00
FISHMAN PEDAL MOD. PRO-FSN-BAS
Fission Bass Powerchord Bass Harmonizer Pedal Adds harmonies to bass lines, including an octave higher, 4th and octave higher, octave and fifth and an octave, fifths and a second octave higher combined, uses signal processing from 32-bit and 24-bit audio conversion, LED's to display selected harmonies, LED's to indicate signal presence and clipping, includes noise suppressor, saturation, tone, and effect level controls.
-
not rated $11,324.00
FISHMAN TONEDEQ PRO-DEQ-AFX PEDAL
Preamplifier for acoustic instruments, input: 10 milli-ohms with discrete class A JFET design, fully analog signal path with parallel digital effects, 4-band EQ with selectable bass, mid, treble and low-cut, 2 reverbs, 2 delays, 2 chorus and flanger or tremolo, soft-knee compressor, boot footswitch (up to 9 dB), selectable phase-invert feedback control, one 1/4” mono instrument input, one 1/4” amp output, XLR DI output balanced with pre/post routing, powered by 9V battery (not included) or Fishman 910-R power adapter (optional), battery life: 12 hours, dimensions: 136 x 241 x 56 mm, weight: 1.1 kg .
-
not rated $15,204.00
FISHMAN AURA PRO-AUR-SPC PEDAL
Fishman Aura mod. PRO-AUR-SPC effects pedal for acoustic guitar with preamp, 128 sounds, 16 user presets, volume, mix and selection controls, 3 notch filters, 3-band EQ, compressor, USB interface to download sounds from the Aura Gallery included software, tuner, anti-feedback switch, works with 9V battery or integrated effects looper adapter.
