Showing 6337–6360 of 8784 resultsSorted by popularity
-
not rated $3,485.00REPLACEMENT EIGHTEEN SOUND 8R-KIT12MB1000
Replacement for Eighteen Sound's 12MB1000 speaker.
-
not rated $1,957.00
REPLACEMENT EIGHTEEN SOUND 8R-KIT12LW800
Replacement for Eighteen Sound's 12LW800 speaker.
-
not rated $2,867.00
REPLACEMENT EIGHTEEN SOUND 8R-KIT10MB600
Replacement for Eighteen Sound's 10MB600 speaker.
-
not rated $3,087.00
REPLACEMENT EIGHTEEN SOUND 8R-KIT10M600
Replacement for Eighteen Sound's 10M600 speaker.
-
not rated $2,867.00
EIGHTEEN SOUND DIAPHRAGM R-H610
Eighteen Sound diaphragm, for ND2080, ND1460T, HD2080T and HD1480T drivers.
-
not rated $3,087.00
EIGHTEEN SOUND DIAPHRAGM R-A8M600
Eighteen Sound diaphragm, for models ND2060A, ND1460A and ND 1480A
-
not rated $6,098.00
DRIVER EIGHTEEN 2 MOD. HD3020T
2” PEN titanium driver, program power: 220W, 75mm voice coil, sensitivity: 110dB, minimum crossover frequency: 1000Hz, flux density: 1.9T, weight: 4.9kg.
-
not rated $3,000.00
EIGHTEEN SOUND DIAPHRAGM D-KIT HD3020T
Replacement for Eighteen Sound's HD3020T driver.
-
not rated $7,981.00
HORN EIGHTEEN SOUND 18 18LW2420/8
18” driver, ferrite magnet, designed for high SPL subwoofer applications in a reflex, bandpass, or horn loaded configuration, fiberglass reinforced straight fluted cone, large displacement suspension system, inner copper voice coil -4” inch exterior, impedance: 8 ohms, rated power: 1300 watts, continuous power: 2600 watts, sensitivity: 97 dB, frequency range: 30 – 2500 Hz, weight: 12.4 kg.
-
not rated $7,981.00
EIGHTEEN SOUND 18 HORN 18LW2400/8
18” driver, ferrite magnet, designed for high SPL subwoofer applications in a reflex, bandpass, or horn loaded configuration, fiberglass reinforced straight fluted cone, large displacement suspension system, inner copper voice coil -4” inch exterior, impedance: 8 ohms, rated power: 1300 watts, continuous power: 2600 watts, sensitivity: 97 dB, frequency range: 30 – 2500 Hz, weight: 12.4 kg.
-
not rated $1,353.00
ASHLY PEMA CONTROLLER MOD. WR-1
Wall controller for distributed audio systems from Ashly. Includes mounting hardware.
-
not rated $4,112.00
ASHLY PEMA CONTROLLER MOD. RW-8C
Controller Ashly Pema. Model: RW-8C. Fader range: +10 dB to -75 dB. Connections: Euroblock. With VCM-88C or NE products: Up to 1,000 feet using #24 twisted pair. Power Requirements: Phantom. Weight: 1.4 Kg. Dimensions: 202 x 103 x 20 mm. Environmental: 4 to 49 degrees Celcius.
-
not rated $6,072.00
ASHLY CARD MOD. NE24.24M OUTPUT
Ashley card. Model: NE24.24M OUTPUT. 4 analog audio outputs for 24.24M audio matrix.
-
not rated $2,715.00
ART MOD PREAMPLIFIER USB-DUAL-PRE
2-channel preamp with USB connection, 2 XLR/jack combo inputs, 48V phantom power, TRS stereo monitor output, headphone output, USB bus-powered (also supports battery or AC adapter operation), zero-latency monitoring, frequency response: 20 Hz – 20 kHz, dimensions: 44.5 x 117 x 119 mm, weight: 0.59 kg.
-
not rated $3,292.00
ART MOD PREAMPLIFIER TUBE-MP
Tube microphone preamplifier with professional audio interface, extremely quiet and unobtrusively constructed input stage, pure and musical amplification up to 70 dB, additional output amplification, XLR inputs and outputs and 1/4" plug, selectable input impedance, LED indicators precise, dimensions: 150 x 44 x 165 mm, weight: 1.1 kg.
-
not rated $3,585.00
PATCHING BAY ART 48 POINTS BAL.
48-point balanced patch bay, cable management solution, optimizes connectivity, 19" inch (1U) steel chassis, balanced 1/4" TRS connectors, CMMR better than -90 dB (-95 dB typical), channel-to-channel isolation better than -80 dB (-95 dB typical), dimensions: 44 x 483 x 89 mm, weight: 2 kg.
-
not rated $6,471.00
MIXER ART MOD. MX225
5-Zone Layout Mixer, Input Connectors: 4 XLR-F Balanced, Output Connectors: 10 XLR-M Balanced, Input Impedance: 47K Ohms, Output Impedance: 200 Ohms, Max Input Level: +20 balanced dBu., maximum output level: +24 dBu balanced.
-
not rated $8,271.00
ART P/AUDIF AMPLIFIER HEADAMP6PRO
6-channel headphone amplifier with separate Bass and Treble controls, front and rear panel output jacks, balanced XLR and 1/4" TRS inputs, operates in 4 modes: Stereo, Mono (Source Left), Mono (Source Right) o Summed Mono (Source Left & Right), independent front-mounted auxiliary input source, 8-segment level meters on all channels and bus, dimensions: 44.5 x 482 x 190 mm, weight: 3.1 kg.
-
not rated $6,612.00
ART P/AUDIF AMPLIFIER HEADAMP6
Headphone amplifier, 6 channels with separate bass and treble controls, front and rear panel output jacks, balanced XLR and 1/4 inputs, operates in stereo, mono (left source), mono (right source), and mono ( left and right sources), auxiliary front mounted on separate input source, 8-segment LED level indicators on all channels and buses, maximum input level: +21.5 dBu, input impedance: 40 kilo-ohms balanced, level Max Output: 500 mW into 32 ohms, Max Gain: 25.6 dB (tone controls flat), Frequency Response: 20 Hz – 50 KHz +0, -2 dB, CMMR: 40 dB, Dimensions: 44.5 x 482 x 190mm, weight: 3.1kg.
-
not rated $12,436.00
AKG-IN MICROPHONE. WMS-450 VD5
AKG wireless microphone. Model: WMS-450-VD5. Includes: One HT-450 handheld transmitter, one D5 microphone, one SR-450 receiver, one SA-63 stand adapter, one AA-size battery, two antennas, one rack mount kit, and one charger.
-
not rated $1,294.00
AKG UHF RECEIVER MOD. SR40 US58
Stationary receiver for WMS 40 systems, UHF operation, 1 channel, carrier frequency range US58 / 734.600 MHz, working range: 100 meters, frequency response: 65 Hz – 20 kHz, display with RF, Mute and Clip status LEDs, Quarter antenna -wavelength, dimensions: 200 x 190 x 44 mm, weight: 630 g.
-
not rated $4,317.00
AKG UHF RECEIVER MOD. SR4000 BANDIV
AKG UHF receiver. Model: SR4000BIV. True Diversity stationary receiver for all WMS 4000 transmitters. Operates in a UHF carrier frequency band from 650 MHz to 863 MHz. FM modulation. Nominal deviation: 20 kHz. Audio bandwidth: 35 to 20,000 Hz. Harmonic distortion: <0.3% with nominal deviation. Signal to Noise Ratio: 118dB Power Consumption: 400mA Measurements: 200 x190 x 44 mm. Weight: 972g.
