Product description
Serie MB, un ultraligero que vuela muy alto…
Quick look
- 500W de potencia digital
- EQ de 4 bandas activo
Mucha potencia y bajo peso.
Todo el control en tus manos
Characteristics
- 1.7kg de peso
- Limitador conmutable
Shipping to all of Mexico. All products are new. Descartar
Subtotal: $22,573.00
$16,714.00
Amplificador GK p/bajo mod. MB 500. Amplificador para bajo, 500 watts a 4 ohms,350 watts a 8 ohms, pad de 10dB, EQ de 4 bandas activo con contour, salida XLR,pre/post EQ, salida speakon. loop de efectos y salida a audífonos, solo pesa 1.7kg!
Sin existencias
Mucha potencia y bajo peso.
Todo el control en tus manos
Weight | 2.89 kg |
---|---|
Dimensions | 56.0 × 30.0 × 12.0 cm |
6-channel headphone amplifier with separate Bass and Treble controls, front and rear panel output jacks, balanced XLR and 1/4" TRS inputs, operates in 4 modes: Stereo, Mono (Source Left), Mono (Source Right) o Summed Mono (Source Left & Right), independent front-mounted auxiliary input source, 8-segment level meters on all channels and bus, dimensions: 44.5 x 482 x 190 mm, weight: 3.1 kg.
In-ear monitor amplifier for personal monitor applications, high-output, battery-safe headphones, dual XLR inputs allowing mono or 2-channel stereo operation, switchable mono/stereo operation with mixing function, level and balance controls / mix, runs up to 12 hours on a 9V battery (not included).
Proel power amplifier. Model: AXRACKM3. Proel amplification rack for Axiom linear system. Includes PC260 processor, 4 HPX6000 amplifiers of 2×2000 at 4 ohms or 2×3000 at 2 ohms and a MDISTRO03_US load center.
Audyson power amplifier. Model: T-2500. Rated power: 4O bridge: 2200 watts. 8O bridge: 1500 watts. 2O stereo: 2×1120 watts. Stereo 4O: 2×750 watts. 8O stereo: 2×500 watts. Subwoofer filter, full range or monitor. LCD monitoring screen. Frequency response: 20Hz - 20kHz. Connectors: Input: Jack & Neutrik XLR male. Output: 3x Neutrik Speakon 4P & Terminal. Rack: 2U. Dimensions: 483 x 88 x 456mm. Weight: 20kg.
Proel Linear Rack Amplifier. Model: AXRACKS3. Amplification rack for linear Axiom equipment. Includes rack, 4 HPX6000 amplifiers and SDISTRO03_US load center.
Precision series power amplifier, power (1 kHz, THD 1%): 1800 watts at 2 ohms, 1300 watts at 4 ohms, 850 watts at 8 ohms, power (20-20 kHz, THD<0.2%): 1200 watts at 4 ohms, 750 watts at 8 ohms, bridged max output: 3600 watts at 4 ohms, 2600 watts at 8 ohms, input impedance (balanced): 20 kohms, input sensitivity: 0 dBu / +6 dBu / +26 dB , signal to noise ratio (A-weighted): 105 dB, dimensions: 133 x 483 x 390 mm, weight: 29 kg.
KA series power amplifier rated at 110 watts per channel at 8 ohms, twin toroidal power supplies for perfect stability.
Discrete vacuum tube/line mic preamp, ultra-low noise with hand-selected 12AX7 tube for ultra-musical sound, mic input stage based on discrete transistor-pair conjugate circuitry, “ultra-wide” bandwidth 10 Hz to 200 kHz for open sound, built-in fully parametric EQs with dedicated center frequency, bandwidth, and level controls, separate line driver to convert -10 dBV to +4 dBu pro-level, +48V soft-mute phantom power to prevent turn-on bump, fully adjustable and switchable 12 dB high-pass filter, switchable reverse phase to correct phase-related problems, precise 12-segment LED metering for output level, servo-balanced inputs and outputs on connectors Gold-plated 1/4” TRS and XLR, internal switched-mode power supply (100-240 V~) for noise-free audio and low power consumption, dimensions: 48 2.6 x 44.45 x 215.9mm, weight: 3kg.
Subtotal: $22,573.00
Reviews
There are no reviews yet.