Product description
Serie MB, un ultraligero que vuela muy alto…
Quick look
- 500W de potencia digital
- EQ de 4 bandas activo
Mucha potencia y bajo peso.
Todo el control en tus manos
Characteristics
- 1.7kg de peso
- Limitador conmutable
Shipping to all of Mexico. All products are new. Descartar
$15,842.00
Amplificador GK p/bajo mod. MB 500. Amplificador para bajo, 500 watts a 4 ohms,350 watts a 8 ohms, pad de 10dB, EQ de 4 bandas activo con contour, salida XLR,pre/post EQ, salida speakon. loop de efectos y salida a audífonos, solo pesa 1.7kg!
Mucha potencia y bajo peso.
Todo el control en tus manos
| Weight | 2.89 kg |
|---|---|
| Dimensions | 56.0 × 30.0 × 12.0 cm |

Precision series power amplifier, power (1 kHz, THD 1%): 1800 watts at 2 ohms, 1300 watts at 4 ohms, 850 watts at 8 ohms, power (20-20 kHz, THD<0.2%): 1200 watts at 4 ohms, 750 watts at 8 ohms, bridged max output: 3600 watts at 4 ohms, 2600 watts at 8 ohms, input impedance (balanced): 20 kohms, input sensitivity: 0 dBu / +6 dBu / +26 dB , signal to noise ratio (A-weighted): 105 dB, dimensions: 133 x 483 x 390 mm, weight: 29 kg.

Ultra-compact 4-channel headphone amplifier for home studio or stage, 4 independent stereo sections, high quality with any type of headphone even at maximum volume, level control per channel, includes DC 12V adapter.

4-channel power amplifier in a rack unit, 1000 watts per channel, 70/1010V operation for distributed systems, Class D design, slot for optional RCM.810 module to allow IRIS-Net control and monitoring, IRIS-Net selection of impedance of each channel (2-10 Ω in 0.1 Ω steps), rear mount attenuators, switchable high-pass filter/Hi-Z mode) 50 Hz, full protection: thermal, overload, short circuit, HF, DC , back-EMF, input current, Pheonix-type I/O connectors, remote contact for power-on/off, programmable power-on delay settings, front-to-rear fans.

Headphone amplifier for electric guitar with built-in distortion, headphone input and AUX In with audio player, works with two AAA batteries (for a duration of more than 40 hours), is ideal for practicing in quiet environments, lightweight design, includes controls of gain, tone and level with a power button.

Audyson power amplifier. Model: T-2500. Rated power: 4O bridge: 2200 watts. 8O bridge: 1500 watts. 2O stereo: 2×1120 watts. Stereo 4O: 2×750 watts. 8O stereo: 2×500 watts. Subwoofer filter, full range or monitor. LCD monitoring screen. Frequency response: 20Hz - 20kHz. Connectors: Input: Jack & Neutrik XLR male. Output: 3x Neutrik Speakon 4P & Terminal. Rack: 2U. Dimensions: 483 x 88 x 456mm. Weight: 20kg.

6-channel headphone amplifier with separate Bass and Treble controls, front and rear panel output jacks, balanced XLR and 1/4" TRS inputs, operates in 4 modes: Stereo, Mono (Source Left), Mono (Source Right) o Summed Mono (Source Left & Right), independent front-mounted auxiliary input source, 8-segment level meters on all channels and bus, dimensions: 44.5 x 482 x 190 mm, weight: 3.1 kg.

Headphone amplifier, 6 channels with separate bass and treble controls, front and rear panel output jacks, balanced XLR and 1/4 inputs, operates in stereo, mono (left source), mono (right source), and mono ( left and right sources), auxiliary front mounted on separate input source, 8-segment LED level indicators on all channels and buses, maximum input level: +21.5 dBu, input impedance: 40 kilo-ohms balanced, level Max Output: 500 mW into 32 ohms, Max Gain: 25.6 dB (tone controls flat), Frequency Response: 20 Hz – 50 KHz +0, -2 dB, CMMR: 40 dB, Dimensions: 44.5 x 482 x 190mm, weight: 3.1kg.

Precision series power amplifier, power: 1200 watts per channel at 2 ohms, 900 watts per channel at 4 ohms, 560 watts per channel at 8 ohms, 2400 watts bridged. 3 rack units, double internal power supply, Hi and Low filter limiter, variable sensitivity, weight: 26 kg.
No hay productos en el carrito.
Reviews
There are no reviews yet.