Showing 73–93 of 93 results
-
not rated $988.00AKG MICROPHONE SUPPORT H15-33
Dedicated suspension kit for the comb C 426 B stereo microphone.
-
-
not rated $427.00
AKG CONFERENCE CABLE MOD. CSMK1.25FM
Cable to connect CS2 individual microphone stations, length: 1.25 meters.
-
-
-
not rated $212.00
AUDIOCENTER CONNECTOR MOD. IP44P/16-32A
5-pole male power connector for CA450 source, IP44 grade, 440V, 16 to 32A.
-
not rated $277.00
AUDIOCENTER CONNECTOR MOD. IP44/16-32A
5-pole female power connector for CA450 source, IP44 grade, 440V, 16 to 32A.
-
not rated $286.00
WHARFEDALE DIAPHRAGM FOR TITAN-15
Wharfedale diaphragm for Titan-15 passive, 12 active and EVP-S series loudspeakers.
-
not rated $16,969.00
KLARK-TEKNIK CARD MOD. KT-DANTE64
Dante Audinate network module with up to 64 bidirectional channels for KLARK TEKNIK DN9650 and DN9652 network bridges and MIDAS NEUTRON-NB expansion module, compatible with KLARK TEKNIK DN9650 and DN9652 network bridges and MIDAS NEUTRON-NB expansion module, enables recording multi-channel and playback via Dante Virtual Soundcard (for PC or Mac), primary and secondary Ethernet interfaces for dual-redundant Dante networks, works from internal Dante Precision Time Protocol (PTP) clock or external clock via of the host unit, optional Dante Controller Software for remote configuration (PC or Mac), LED indicators to monitor speed and activity, designed and manufactured in England.
-
not rated $17,996.00
EV MODULE FOR POWER MOD. RCM-28
Omneo network interface and DSP module for Tour Grade amplifiers, extends Tour Grade performance with powerful DSP functionality, advanced FIR-Drive speaker optimization, high-precision load impedance monitoring, two GPI ports and two GPO ports, one button test system for a quick and complete check of connected cables and components, pilot tone detection for cable supervision, six recallable DSP/configuration presets, compatibility with any Dante network.
-
-
not rated $860.00
AKG MICROPHONE MODULE MOD. GN50CS
AKG module. Model: GN50. 20” inch gooseneck for use with AKG modular cartridges. Length: 50 cm. Fixed phantom power adapter. Includes PS3FLock. Programmable LED indicator. With switch. black colour. For facilities.
-
not rated $741.00
AKG MICROPHONE MODULE MOD. GN30CS
AKG module. Model: GN30. 15” inch gooseneck for use with AKG modular cartridges. Length: 30 cm. Fixed phantom power adapter. Includes PS3FLock. Programmable LED indicator. With switch. black colour. For facilities.
-
not rated $875.00
BEHRINGER NOISE ELIMINATOR MOD. HD400
Hum and noise remover, fast, easy and reliable, maintains the highest sound quality, 2 independent channels for 2 mono signals or 1 stereo signal, automatically converts unbalanced signals to balanced without signal loss.
-
not rated $1,366.00
DIRECT BOX BEHRINGER MOD. DI100
Professional multi-purpose direct box for stage and studio applications, is powered by phantom power or 9V battery, provides impedance and matching for direct connection signals from instruments to mixers and amplifiers, ultra-flat frequency response, thanks to its famous OT- 1 from Behringer, internal battery automatically shuts off when phantom power is applied, allows direct connection to speaker outputs with up to 3,000 watts, switchable input attenuation allows input levels up to +50 dB, Ground Lift switch eliminates hassle typical ground loop, gold-plated TRS 1/4” and XLR connectors, ultra-resistant aluminum housing, stackable oversized rubber corners, dimensions: 150 x 130 x 60 mm, weight: 650 g.
-
not rated $883.00
CABLE TESTER BEHRINGER MOD. CT-100
Microprocessor controlled 6-in-1 professional cable tester with 3 modes: Cable, Installed Cable Test and Tone Test mode, accepts all standard connectors: XLR, TRS (1/4”, 1/8”, TT) RCA and MIDI, super easy operation with intuitive LED display, continuity check and flash detection, phantom power and ground shield check, test tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV, works with two AA batteries (not included), includes belt clip.
-
not rated $847.00
CONTROL BEHRINGER CROSSFADER MOD. X1
Fader óptico sin contacto, vida ultra larga, precisión digital ultra alta (128 posiciones), sensación verdaderamente analógica.
-
not rated $667.00
KIT RELOOP MANOMETER AND ASSEMBLY D/CARTRIDGE
All-in-one set to adjust, align and clean your turntable arm and cartridge, mirrored SME alignment tool to align the cartridge, high-efficiency cleaning fluid to remove stylus dirt and vinyl debris, metal screwdriver for mounting cartridge holder systems, spirit level for aligning pickup systems and for adjusting turntables, CD players and other equipment, tone arm balance for determining stylus contact force with 5 counterweights (0.5 – 3 g), high-quality tweezers and storage box.
-
not rated $1,005.00
PROEL LAMP FOR SHEET RSM-430
Sheet Music Stand Lamp, Weight: 0.435 kg, Cord Length: 2 m, Lamp Style: E14, 40 Watts Max Power.
