Showing all 15 results
-
not rated $8,179.00MICROPHONE ASTON MOD. STEALTH
High-performance cardioid moving coil microphone, ideal for studio or live shows, gaming and broadcast, 4 interchangeable voices (Vocal 1, Vocal 2, Guitar and Dark), integrated Class A microphone preamplifier, unique internal Sorbothane damping system, Active and Passive with 48V auto-sensing function, frequency response: 20 Hz – 20 kHz, maximum SPL: 140 dB, large Aston sound, weight: 692 g.
-
not rated $4,187.00
MICROPHONE ASTON MOD. ELEMENT BUNDLE
Large Diaphragm Active Moving Coil Studio Microphone, Cardioid Polar Pattern, Frequency Response: 20Hz – 20kHz, Unrivaled Performance, Ideal for Vocals and Acoustic Instruments, All-New Capsule, Waveform Contoured Chassis, Bright Cool Purple Badge , exclusive Ridyon capsule technology that combines the best elements of a dynamic, condenser and ribbon microphone, patented magnetic pop filter, includes a stylish and highly effective shock-mount, eco-friendly packaging, maximum SPL: 132 dB, length: 163 mm, width: 58mm, weight: 275g.
-
-
not rated $21,617.00
NEUMANN MICROPHONE MOD. KMS105MT
Studio-quality stage microphone for vocals and instruments, tight super-cardioid pickup pattern with excellent feedback rejection, condenser capsule, transparent sound with smooth treble lift, highly effective foam-free pop filter, unaffected by extreme sound pressure levels, robust construction, very low handling noise, frequency range: 20 Hz – 20 kHz, impedance: 50 ohms, maximum SPL: 150 dB, 3-pin female XLR connector, diameter: 48 mm, length: 180mm, weight: 300g.
-
not rated $26,330.00
NEUMANN MICROPHONE MOD. KM-184MT
Versatile small diaphragm microphone, primarily for instrumental recording, pressure gradient transducer with cardioid polar pattern, slight treble boost for crisp, vivid sound, precise cardioid directionality with excellent back sound rejection, colorless reproduction of neighboring sound sources, tight production tolerances, perfect for stereo recordings, ideal for far and near miking of instruments, stereo and live recordings, spot mic for solo and ensemble recordings, overhead (drums and percussion) and announcer microphones, frequency range: 20 Hz – 20 kHz, Sensitivity 15 mV/Pa, Nominal Impedance: 50 ohms, Max SPL: 138 dB, Max Output Voltage: 10 dBu, Current Draw: 3.2 mA, Compatible Connectors: 3-pin XLR female, 22 diameter mm, length: 107 mm, weight: 80 g.
-
not rated $17,182.00
EV MICROPHONE MOD. RE-27N/A
Broadcast announcer microphone with neodymium capsule and variable-D, dynamic element, cardioid polar pattern, open, clear and detailed tonal reproduction, very defined vocal characteristic, very defined vocal characteristic, variable-D for minimal proximity effect, the neodymium element design provides 6 dB more sensitivity, studio condenser-like performance, three filter switches shape your voice, humbucking coil protects against line hum, integral wind filters, XLR connector 3-pin, frequency response: 45 – 20,000 Hz, finished in satin nickel, weight: 709 g.
-
not rated $14,954.00
EV MICROPHONE MOD. RE-20
180 degree off-axis color-free cardioid dynamic microphone, voice-tailored frequency response: 45 Hz – 18 kHz, output impedance: 150 ohms, color silver, XLR connector, weight: 700 g, D-Variable for minimum proximity effect, long diaphragm, humbucking pickup, bass roll-off switch, includes mounting bracket and carrying case.
-
not rated $3,153.00
PROEL VOCAL MICROPHONE MOD. RM8
Bi-directional ribbon microphone, figure-8 polar pattern, 0.02mm double-sided pure aluminum foil, vivid and natural sound, frequency response: 20Hz – 20kHz, sensitivity: -34dB ±2dB (0dB=1vPa @ 1 kHz), wide low-frequency range to capture fast transients in vocals, acoustic instruments, and concert hall shows, Max SPL: 130 dB, Signal-to-Noise Ratio: 79 dB, Impedance: 200 ohms + 30% (at 1 kHz) , recommended load impedance: 1000 ohms, self noise: 15 dB A, filter: high-pass 100 Hz 12 dB/Oct, pad: 0 / – 10 dB, power requirements: phantom power: 48 Volt DC, connector: 3 Pin XLR male, WIMA capacitors, works well with audio interfaces in home studios, aluminum case with latches for storage, weight: 512 g, dimensions: 50.5 (diameter) x 152 mm, power consumption: 3 mA, accessories: shockmount .
-
not rated $2,538.00
PROEL VOCAL MICROPHONE MOD. DM55V2
Vocal microphone with vintage design, lightweight satin chrome metal housing, transducer: dynamic moving coil, cardioid polar pattern, frequency response: 50 Hz – 15 kHz, sensitivity: -53 dBV ± 3 dB, maximum SPL: 135 dB, signal to noise ratio: 74 dB, impedance: <600 ohms, connector: XLR 3-pin male, dimensions: 180 x 45 mm, weight: 360 g.
-
not rated $3,567.00
EIKON VOCAL MICROPHONE MOD. RM8
Bi-directional ribbon microphone, figure-8 polar pattern, 0.02mm double-sided pure aluminum foil, vivid and natural sound, frequency response: 20Hz – 20kHz, sensitivity: -34dB ±2dB (0dB=1vPa @ 1 kHz), wide low-frequency range to capture fast transients in vocals, acoustic instruments, and concert hall shows, Max SPL: 130 dB, Signal-to-Noise Ratio: 79 dB, Impedance: 200 ohms + 30% (at 1 kHz) , recommended load impedance: 1000 ohms, self noise: 15 dB A, filter: high-pass 100 Hz 12 dB/Oct, pad: 0 / – 10 dB, power requirements: phantom power: 48 Volt DC, connector: 3 Pin XLR male, WIMA capacitors, works well with audio interfaces in home studios, aluminum case with latches for storage, weight: 512 g, dimensions: 50.5 (diameter) x 152 mm, power consumption: 3 mA, accessories: shockmount .
-
not rated $1,722.00
EIKON VOCAL MICROPHONE MOD. DM55V2
Vocal microphone with vintage design, lightweight satin chrome metal housing, transducer: dynamic moving coil, cardioid polar pattern, frequency response: 50 Hz – 15 kHz, sensitivity: -53 dBV ± 3 dB, maximum SPL: 135 dB, signal to noise ratio: 74 dB, impedance: <600 ohms, connector: XLR 3-pin male, dimensions: 180 x 45 mm, weight: 360 g.
-
not rated $3,464.00
EIKON VOCAL MICROPHONE MOD. C14
Studio microphone, pressure gradient condenser transducer, unidirectional polar pattern, transparent sound with superb detail and warm harmonic content, extended low-range frequency response from 20 Hz – 20 kHz, high-pass filter and -10 dB pad, power requirements: +48 V phantom power, WIMA capacitors, sensitivity: -35 dB, impedance: 100 ohms, 3-pin male XLR connector, integrated shockmount, power consumption: 3 mA, dimensions: 50.5 Ø x 152 mm, weight: 393g.
