$5,055.00
Electro-acoustic guitar with classic body, thin edge, undercut, spruce top, nato neck, mahogany back and sides, rosewood fingerboard, sonokeling bridge, natural color, KLT-34 active preamp with digital tuner, EQ. 4 bands, volume and phase, D'Addario nylon strings.
Sin existencias
| Weight | 2.88 kg |
|---|---|
| Dimensions | 47×102×14 cm |
Guitar cabinet, slanted cabinet, two 12” Blackstar Blackbird speakers, 160 watt power, impedance: 4 and 16 ohms, fits perfectly to the HT-1RH MkII amplifier, extraction panel on the back that allows easy change of a tight low-end to semi-open back configuration for a wide midrange, made of birch plywood, dimensions: 716 x 502 x 295 mm, weight: 20 kg.
Self-amplified system for acoustic guitar and voice SA220. 200 watts, 2 channels, 6 x 4” neodymium mid woofers and 1 x 20 watt neodymium tweeter, dual 3-band EQ, 4 types of reverb and anti-feedback system, XLR and 1/4 inputs ” includes tripod and soft case, easy transport, weight: 15.75 kg, phantom power and level controls.
Combo for electro-acoustic guitar, 2 channels, 1 XLR input for microphone and 1 Jack input for instrument, volume for each channel, equalizer: bass, middle and treble, chorus effect, RCA input for player, line output, headphone output, power: 25 watts RMS, 8” speaker at 8 ohms and 2.5” tweeter, power consumption: 35 watts, dimensions: 463 x 375 x 260 mm.
Guitar cabinet, one 12” speaker, semi-open/closed rear panel, 50 watt power, 16 ohm mono speaker input.
Guitar combo, power: 10 watts, clean and overdrive channels, easy-to-use all-analog design, patented ISF tone control and delay tape effect, speaker emulated output, MP3/Line in, 2 x 3” speakers, stereo linear response speakers perfect for mp3 playback, dimensions: 252 x 216 x 142 mm, weight: 3 kg.
Guitar combo, 12” speaker, 10W power, one 6L6 tube and one ECC83 tube, gain, tone, reverb and master volume controls, StandBy and On/Off switch, power LED indicator, main input, outputs speaker at 1×16 ohms, 1×8 ohms and 2×16 ohms, emulated speaker output and headphone output, effects loop (return, send and level switch +4 and -10 dBV), input for footswitch, dimensions: 473 x 421 x 251 mm, weight: 14.7 kg, includes FS-4S footswitch, an FS-8 footswitch (not included) can be used to control drive and reverb.
Bass cabinet, 300W of power, a 15” speaker at 8 ohms with tweeter, perfect for musicians in concert, high reliability, for rough use, link output and jack/speakon speaker output, dimensions: 490 x 470 x 335 mm, weight: 14.8 kg.
Reviews
There are no reviews yet.