Showing all 9 results

  • PEDAL BLACKSTAR P/GUITARRA LT-PEDAL BOAR

    Pedalboard including one LT Dual pedal, one LT Metal pedal, one LT Dist pedal, one LT Drive pedal, one LT Boost pedal, all patch cables and power adapter.

    not rated $10,128.00
  • PEDAL SOURCE AUDIO COLLIDER

    Delay and Reverb Effects Pedal for Electric Guitar, Create a Lush Stereo Extension with True Stereo Inputs and Outputs, Two Completely Independent Processors That Essentially Provide Two High-Powered Pedals in One Housing, Whether You Use Delay or Reverb Your Signal Still Has analog dry through routing, selectable between true bypass or buffered bypass, compact design, extruded anodized aluminum housing and slim profile, 8 presets recallable with onboard controls on the footswitch and a total of 128 presets recallable with an external MIDI controller, the app Neuro Mobil and the Desktop Neuro Editor provide “unlock” access to both sides of the pedal, giving you access to the opposite side regardless of switch position. which means it is possible to use this pedal as dual delay pedal and dual reverb pedal and to change the order of effects, Tap Tempo, Reverb Hold mode to hold or freeze your reverb trail, Knob Lock switch to avoid losing accidents that could lose settings, full MIDI functionality, expression control, functionality to discover previous knob positions, includes 9V DC power adapter and 1/8” to 1/4” cable for Neuro app connection Mobil, power consumption: 300 mA, USB port, dimensions: 11.4 x 11.4 cm (including knobs), weight: 0.45 kg.

    not rated $10,416.00
  • PEDAL NUX NGS-6 AMP ACADEMY

    Pro-level amp modeling with bias tweaking, 7 independent moving signal blocks with send/return effects loop, intuitive operation and editing software, 1024-sample IR resolution, and slot for third-party IR loader with automatic format editor, scenes versatile application modules with independent 1/4” and XLR IR outputs, ultra-low system latency (1.2 ms) and powerful premium NXP RT DSP (1 GHz), comes with insertable Y cable for effects loop send /return, USB recording interface, AmpAcademy editor software and firmware update, 110 dB ultra-wide dynamic range, input impedance: 1 milli-ohm, output impedance: 1 kilo-ohm, sample rate: 48 kHz / 32 -bit, power: 9V DC (tip negative, optional adapter ACD-006A), current consumption: less than 300 mA, dimensions: 105 x 115 x 58 mm.

    not rated $4,064.00
  • PEDAL NUX NAP-5 STAGEMAN FLOOR PREAMP/DI

    Analog acoustic preamp pedal, chorus, reverb and freeze effects, notch knobs, gain knobs, 3-band EQ (bass, middle and treble), mid frequency switch, input optimization lever for piezo or magnetic pickups, 60 looper seconds, XLR DI output, 1/4" TRS Send/Return inputs, 1/8" auxiliary input, headphone output, USB input for firmware updates.

    not rated $3,193.00
  • HOTONE PEDAL MOD. XP-20 MINI XTOMP

    Mini Modeling Pedal, 120+ effects in one small pedal, free updates via app, Hotone CDCM technology for maximum dynamics and realistic feel, USB port for firmware updates, aluminum housing, buffered bypass with 100% signal path analog, 6 transparent knobs with LEDs, footswitch: Effect bypass, power consumption: 250 mA, 9V DC power supply (not included), does not use batteries, dimensions: 63 x 113 x 43 mm, weight: 200 g.

    not rated $3,227.00
  • FISHMAN PLATINUM PRO PRO-PLT-201 PEDAL

    Discrete, high-headroom 17V Class A analog preamp for acoustic instruments, 5-band tone control with sweep-mid and crossover frequency, EQ mode that tailors the EQ for bass or other instruments, phase control, and precision notch filter reduces feedback, adjustable one-knob compressor smooths playing dynamics, onboard fully chromatic digital tuner, volume boost footswitch with level control (+12 dB), balanced XLR DI with pre/post EQ adjustment and ground lift, powered by 9V battery (not included) or Fishman 910R power adapter (optional), battery life: 30 hours, dimensions: 158 x 143 x 54 mm, weight: 0.64 kg.

    not rated $9,931.00
  • FISHMAN TONEDEQ PRO-DEQ-AFX PEDAL

    Preamplifier for acoustic instruments, input: 10 milli-ohms with discrete class A JFET design, fully analog signal path with parallel digital effects, 4-band EQ with selectable bass, mid, treble and low-cut, 2 reverbs, 2 delays, 2 chorus and flanger or tremolo, soft-knee compressor, boot footswitch (up to 9 dB), selectable phase-invert feedback control, one 1/4” mono instrument input, one 1/4” amp output, XLR DI output balanced with pre/post routing, powered by 9V battery (not included) or Fishman 910-R power adapter (optional), battery life: 12 hours, dimensions: 136 x 241 x 56 mm, weight: 1.1 kg .

    not rated $9,419.00
  • TC PEDAL FOR DITTO X4 LOOPER GUITAR

    Guitar looper pedal, dual loop tracks to create surround multitrack compositions or full songs, 7 loop FX, MIDI sync, loop decay, stereo input and output, StarJam to import free loops made by the best in music, power: 9V DC/300mA, dimensions : 235 x 145 x 57mm.

    not rated $6,604.00
  • NUX PROCESSOR FOR GUITAR MG-20

    Effects processor for guitar, includes 60 DSP effects and 16 amp and cabinet emulators, has effects such as overdrive, distortion, compression, EQ, delay, reverb and modulation effects such as Chorus, Phaser, Flanger, Tremolo, etc, large screen 2.4” color drum machine and loop station, tuner, additional control switch, built-in MP3/WAV player, friendly user interface, 36 factory and 36 user presets, output modes, DSP floating point processing 32 bits, USB port, dimensions: 330 x 210 x 83 mm, weight: 3.15 kg.

    not rated $6,192.00