EIKON VOCAL MICROPHONE MOD. C14
$3,464.00
Studio microphone, pressure gradient condenser transducer, unidirectional polar pattern, transparent sound with superb detail and warm harmonic content, extended low-range frequency response from 20 Hz – 20 kHz, high-pass filter and -10 dB pad, power requirements: +48 V phantom power, WIMA capacitors, sensitivity: -35 dB, impedance: 100 ohms, 3-pin male XLR connector, integrated shockmount, power consumption: 3 mA, dimensions: 50.5 Ø x 152 mm, weight: 393g.
100% online, without paperwork or monthly fees
Questions? Check our FAQ . Credit subject to approval.
Additional Information
Weight | 1.474 kg |
---|---|
Dimensions | 29 × 24 × 12.5 cm |
Related products
BUOY MICROPHONE MOD. BY-VG350
Universal Smartphone Video Microphone Kit - Ideal for YouTubers, Vlogers and Videographers - Fits Most Smartphones - Shotgun Microphone Cardioid Electret Condenser Transducer - Pitch and Roll Ball Head Control - Frequency Response: 35 - 18 kHz (±3 dB), sensitivity: -42 dB, signal to noise ratio: 76 dB SPL, 3.5 mm TRS and TRRS connector, includes microphone, smartphone clamp, LED light, ball head, extension tube , mini tripod and clamp with shoe mount, dimensions: 22 x 81 mm, extension tube length: 160 – 250 mm, weight: 455 g.
BUOY MICROPHONE MOD. BY-BM3031
Shotgun microphone for camera, recording and transmission quality for clear and precise audio, lower noise and higher sensitivity, frequency response: 40 – 20,000 Hz, dynamic range: 120 dB, impedance: 200 ohms, works with 2 AA batteries (not included ), two-step high-pass filter (flat, 80Hz), 3-position level control (-10dB, 0, +20dB), 3.5mm plug connector, integrated shockmount and shoe-mount, made of ABS plastic, includes foam windproof Product dimensions: 24 x 16 x 9 cm. Weight: 0.37 Kg.
BUOY MICROPHONE MOD. BY-M2
Clip-on Condenser Lavalier Microphone for iOS Devices, Omnidirectional Polar Pattern, Detachable Design for Multiple Uses, Apple MFi Certified Lightning Connector, Allows Other 3.5mm Microphone, TRS Output to iOS Devices, No Battery Required, Frequency Response: 50Hz – 20 kHz, 6 meter cable, weight: 46 g.
EIKON INSTRUMENT MICROPHONE MOD. CM602
Instrument microphone, ideal as overhead for drums and percussion and breath instruments, transducer: back electret condenser, unidirectional polar pattern, frequency response (±3dB): 50 – 18,000 Hz, sensitivity at 1 kHz: - 45 dB ± 3 dB, maximum SPL for 1% THD: 130 dB, equivalent noise level: 70 dB, impedance: 250 ohms, recommended load impedance: 1000 ohms, phantom power +48 VDC, 3-pin male XLR connector, weight: 240 g, dimensions :135 x Ø23mm.
BUOY MICROPHONE MOD. BY-M1
Omnidirectional condenser lavalier microphone, ideal for smartphones, DSLRs, camcorders and audio recorders, high-quality condenser for video use, ultra-low handling noise, includes lapel clip, LR44 battery, windscreen and 1/4” adapter , Frequency response: 65 Hz to 18 kHz, Impedance: 1000 ohms or less.
BUOY MICROPHONE MOD. BY-M100UC
Miniature omnidirectional condenser microphone, USB (Type C) connector, ideal for computers, smartphones and tablets with USB Type C input, 50 Hz to 18 kHz frequency response, plug and play operation, 180° degree swivel head, convenient for capture audio, includes foam windshield, sensitivity: -36 ±2 dB (0 dB = 1V/Pa, at 1 kHz), signal-to-noise ratio: 65 dB, weight: 9 g, cable length: ?18 x 74 mm .
BUOY MICROPHONE MOD. BY-M110
Miniature omnidirectional condenser microphone, 3.5mm TRRS, ideal for smartphones, tablets, laptops or devices with TRRS input, 50Hz to 18kHz frequency response, plug and play operation, 180° rotating head, convenient for capturing audio , includes foam windshield, sensitivity: -36 ±2 dB (0 dB = 1V/Pa, at 1 kHz), signal to noise ratio: 65 dB, weight: 9 g, cable length: ?18 x 74 mm.
BUOY MICROPHONE MOD. BY-M1000
Large-diaphragm condenser microphone, gold-plated diaphragm, broadcast quality, cardioid, omnidirectional and bidirectional polar patterns, wide frequency range and ultra-low noise, off-axis rejection for clean recordings, includes shockmount and pop filter, controlled by switch low cut filter, 0 dB, -10 dB pad switch, electrically balanced output, 3-pin XLR connector, all-metal housing, includes 3/8” and 5/8” thread, dimensions: 207 x 115 x 185 mm, weight: 812g.
Reviews
There are no reviews yet.